Configure The Fax - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide
Steps
1. On the main page of the H3140, select VoIP > Media. The Phone-1 page is dis-
played, see
Figure 6-7 Media Page
2. Set the parameters. For a description of the parameters, refer to
Table 6-6 Media Parameter Descriptions
Parameter
Codec Selection
Codec Priority
3. Click Apply button to apply the changes.

6.6 Configure the Fax

Abstract
The H3140 supports the T30 protocol , T38 protocol and V152 protocol fax feature. By
default, the T38 protocol is used.
Steps
1. On the main page of the H3140, select VoIP > Fax. The Fax page is displayed, see
Figure
Figure 6-8 Fax Page
72
Figure 6-7.
Description
Select a codec, which must be the same as that configured in the SS
system.
You can modify priority through this parameter. A lower number indi-
cates a higher priority.
6-8.
SJ-20210621164956-009 | 2021-12-07(R1.0)
Table 6-6.