Configure The Qos - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide
Figure 4-7 New 3G Connection
Table 4-3 New 3G Connection parameters
Parameter
Connection Name
PDP Type
APN
Dial Number
MTU
Username/Password
Authentication Type
Connection Mode
Auto-disconnected without traffic
NAT Switch
5. Click Apply button to apply the changes.

4.3 Configure the QoS

22
Description
Name the 3G connection.
There are two PDP types:
IP

PPP

Set the communication standard of the access network to
be used.
For example "3GNET".
Dial Number.
Different communication standards have different dial num-
bers.
Define the maximum transfer unit.
The Username/Password of new 3G connection.
There are three authentication types:
Auto

PAP

CHAP

There are two connection modes:
Always On

On Demand

Setting this parameter when Connection Mode is On De-
mand.
Select on/off NAT switch function.
SJ-20210621164956-009 | 2021-12-07(R1.0)