Zte H3140 Maintenance Management Manual page 80

H3140 Maintenance Management Guide
Steps
1. On the main page of the H3140, select VoIP > POS. The POS page is displayed, see
Figure
Figure 6-10 POS Page
2. Set the parameters. For a description of the parameters, refer to
Table 6-9 Parameter Descriptions for the POS
Parameter
POS on FXS1/POS on
FXS2
3. Click Apply button to apply the changes.
74
6-10.
Description
If the switch is selected, the outgoing/incoming call codec of the inter-
face is negotiated as G711a, which is used to support the access to
POS machine on this interface.If this switch is not selected, the outgo-
ing/incoming calls on the interface are negotiated in accordance with
the media configuration mode on the voice page.
SJ-20210621164956-009 | 2021-12-07(R1.0)
Table 6-9.