Zte H3140 Maintenance Management Manual page 15

Figure 2-4 The Rear Panel
Interface/Button
WiFi
WPS
Reset
On/Off
Power
Tel1
Tel2
USB2
LAN1-LAN3
LAN4/WAN
Fibra
SJ-20210621164956-009 | 2021-12-07(R1.0)
Function
WLAN switch , it is used to turn on / off the WLAN.
WPS Push Button.
During power ON period, hold on this button for more than 5 seconds to
reset the current settings to the factory default setting, and then the sys-
tem restarts automatically.
Power switch, to power on or power off the device.
Power supply port, It is connected to the power adapter.
RJ-11 port, it is used to connect to the analog telephone.
USB 2.0 host port, it is used to connect to USB storage device.
RJ-45 port, it is used to connect the modem to computer , STB or other
network devices.
RJ-45 port, it is used to connect to the uplink Ethernet access network
Optical port, it is used to connect to the uplink PON network.
2 Product Overview
9