Zte H3140 Maintenance Management Manual page 53

Table 5-4 Access Control-Mode configuration parameters
Parameter
No Filter
Black List
White List
4. Click Apply button to apply the changes.
Access Control-Rule Configuration
5. Click Access Control-Rule Configuration to the configuration page, see
5-6.
Figure 5-6 Access Control-Rule Settings
6. Configure the access control-rule configuration
control-rule configuration parameters.
Table 5-5 Access Control-Rule Configuration parameters
Parameter
Name
MAC Address
SSID
7. Click Apply button to apply the changes.
SJ-20210621164956-009 | 2021-12-07(R1.0)
Description
No filter is to be applied (the default).
Deny LAN users to access specific address.
Allow LAN users to access specific address.
parameters.Table 5-5
Description
The name of access control item.
The MAC address of the wireless device.
We suggest to set the MAC addresses in access control list
using a wireline connected device.
Modifying the list using a wireless device may cause unex-
pected disconnection of the device used.
SSID name corresponding to the wireless network that the
rule is applied to. The default value is Wi-Fi 2.4GHz&5GHz.
5 Configure the Local Network
Figure
lists the access
47