Zte H3140 Maintenance Management Manual page 38

H3140 Maintenance Management Guide
Figure 4-16 Service Control-IPv6 Page
Table 4-11
Table 4-11 Parameter Descriptions for the Service Control-IPv6
Parameter
On/Off
Name
Target
Ingress
Prefix
Service Type
6. Click Apply button to apply the changes.
Configure the Remote Service Port Control-IPv4
7. Click Remote Service Port Control - IPv4 to open Remote Service Port Control -
IPv4 page, see
32
lists the Service Control-IPv6 parameters.
Description
Click On to enable the function.
Click Off to disable the function.
Name of the service control item.The name must be specified.
Specify to discard or permit the data packages.
Specify the data stream inbound direction, and this parameter must
be specified.
If the Ingress is WAN_All, all the WAN connection can access

H3140.
If the Ingress is LAN, the LAN side can access H3140.

If the Ingress is a WAN or Route_3G connection, the connection

selected can access H3140.
IPv6 address prefix.
Type Specify the service that is permitted or denied to access.
Figure 4-17.
SJ-20210621164956-009 | 2021-12-07(R1.0)