Configure The 3G - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide
Parameter
GUA
Gateway
PD
DNS1–DNS3
VLAN
VLAN ID
In the H3140 provisioning, configure only one Internet-WAN connection and delete
other WAN connections.
2. Click Apply button to apply the changes.

4.2.2 Configure the 3G

Abstract
A Dongle device can be connected to H3140 through a USB interface. If the Dongle has
a 3G (SIM) card inserted, the H3140 can access the Internet through the Dongle device.
Contacts
Table 4-2
Table 4-2 3G Configuration Process
Steps Operation
1 Insert 3G device.
20
Note
lists the 3G process of configuring the WAN connection.
Description
DHCPv6: The device acquires a global address through

DHCPv6. If no option is selected, it indicates that no address
acquisition mode is configured.
PD: You need to set a static IPv6 address.

SLAAC: The device generates a global address in accor-

dance with the RA packets from the upper-layer server.
Mode of obtaining global address.
It is usually the IPv6 address of the H3140 device by default.
Prefix Delegation.
IPv6 address of the DNS server for static connections. You can
set up to three IPv6 addresses for the server. These IPv6 ad-
dresses are provided by the ISP.
Specifies whether to carry a VLAN tag in the packets sent over
the WAN connection. By default, On button is not selected. If it
is selected, a VLAN tag is carried in the packets sent over the
WAN connection, and the VLAN ID must be set.
Identifies a VLAN. Range: 0–4094. To ensure normal service op-
eration, the VLAN ID must be the same as that set in upper-lay-
er MDU/DSLAM configuration.
Instructions
Null.
SJ-20210621164956-009 | 2021-12-07(R1.0)