Zte H3140 Maintenance Management Manual page 51

Parameter
Band Width
SGI
Beacon Interval
Transmitting Power
6. Click Apply button to apply the changes.
WLAN global configuration (5 GHz) refers to WLAN global configuration (2.4 GHz).
Configure the Private WLAN SSID Configuration
7. Click Private WLAN SSID Configuration to the configuration page, see
Figure 5-4 Private WLAN SSID Configuration Page
8. Table 5-3
SJ-20210621164956-009 | 2021-12-07(R1.0)
Description
Radio frequency bandwidth, including Auto,20 Mhz and 40 Mhz. De-
fault: Auto.
Enable or disable
Interval for transmitting beacon frames, default: 100 ms.
Beacon frames are used for communicating with other AP devices or
network control devices to announce the WLAN presence.
Level of radio signal transmitting power. A larger value indicates wider
coverage and the larger the value, the stronger the radio signal.Options:
100%

80%

60%

40%

20%

Note
lists the private WLAN SSID configuration parameters.
5 Configure the Local Network
SGI function.
Figure 5-4.
45