Zte H3140 Maintenance Management Manual page 25

Parameter
Link Type
PPP Transfer Type
PPP
Username/Password
IP Version
IPv4
IP Type
IP Address
Subnet Mask
Gateway
DNS1-DNS3
NAT
IPv6
IPv6 Info Acquire Mode
Request PD
Unnumbered Mode
GUA Allowed From
SJ-20210621164956-009 | 2021-12-07(R1.0)
Description
In this case, default value is 1500.
There are two link types: PPP and IP.
In this case, default value is PPPoE.
PPPoE user name and password.
They are provided by the ISP.
The IP version includes: IPv4 and IPv6 IPv4/v6
In this case, IPv4 is selected.
By default, it is set to DHCP. Options:
DHCP: The DHCP server automatically allocates a dynamic

IP address to the device.
Static: You need to specify a static IP address for the device.

IP Address of H3140.
Subnet mask of H3140.
It is usually the IP address of the H3140 by default.
IP address of the DNS server for static connections. You can set
up to three IP addresses for the server. These IP addresses are
provided by the ISP.
Enable or disable the NAT function.
Specifies how to acquire IPv6 information for the WAN connec-
tion. It is valid only if the WAN connection supports IPv6.
The options are:
Manual :You need to set the global address, gateway, and

DNS acquisition modes.
Auto :The global address, gateway, and DNS acquisition

modes are automatically configured.
By default, the On button is selected.
By default, the On button is not selected. If it is selected,
Specifies how to acquire the global IPv6 address.
Specifies how to acquire the global IPv6 address. It is valid on-
ly when the IPv6 Info Get Mode parameter is set to be Manual
Mode. Options:
4 Configure the Internet
19