Zte H3140 Maintenance Management Manual page 93

Table 7-8 Ping Diagnosis Parameter Descriptions
Parameter
IP Address or Host Name
Egress
4. Click Diagnosis to diagnose the connection. The system pings the specified ad-
dress. The system performs ping operations for four times by default, and the opera-
tion results are displayed in the bottom box.
Trace Route Diagnosis
1. Click to open Trace Route Diagnosis page, see
Figure 7-15 Trace Route Diagnosis Page
2. Set the parameters. For the description of the parameters, refer to
Table 7-9 Parameter Descriptions for Trace Route Diagnosis
Parameter
IP Address /Host
Name
Egress
Maximum Hops
SJ-20210621164956-009 | 2021-12-07(R1.0)
Description
Destination IP address or host name.
Data direction. If you want to detect the connection with an external
address, select a WAN connection.
Description
Destination IP address or host name for the Trace Route operation.
To detect the connection with an external address, select a WAN connection.
Maximum number of hops that the Trace Route packets require for arriving at
the destination, default: 30.
7 Configure the Management and Diagnosis
Figure 7-15.
Table 7-9.
87