Configure The Edns0; Configure The Route; Configure The Routing (Ipv4) - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide

5.3.3 Configure the eDNS0

Abstract
eDNS0 (extension Mechanisms for DNS Version 0) is an extension of DNS on the basis
of RFC 1035. eDNS0 Allows the DNS requester to publicize the size of its UDP packets
and make it easier to transmit packets larger than 512 bytes.
Steps
1. On the main page of the H3140, select Local Network > LAN > eDNS0 to the eD-
NS0 page, see
Figure 5-17 eDNS0 Page
2. Click On to enable the eDNS0 function and click Apply button to apply the changes.

5.4 Configure the Route

5.4.1 Configure the Routing (IPv4)

Abstract
The section describes how to configure routing (IPv4), which provides the parameters of
route (IPv4) configuration features.
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Prerequisite
Before configuring routing (IPv4), make sure that the IPv4 WAN connection is created.
Steps
Configure Routing Table
1. On the main page of the H3140, select Local Network > Routing > IPv4 to the
Routing(IPv4) page.
2. Click Routing Table to the configuration page, see
56
Figure 5-17
Figure 5-18.
SJ-20210621164956-009 | 2021-12-07(R1.0)