Canon GALVANO GC-251 User Manual page 40

The signal name is displayed on the evaluation monitor board. Please check the signal after referring
to the table of the following pin arrangement.
Analog monitor output connector
Connector model number
Connector
Board side
Cable side
Connector pin arrangement
Pin No.
1
2
3
4
5
6
7
8
9
10
The controller has three monitor terminals for each of the two axes to check the operation status.
The output signal contents can be changed and the output magnification can also be changed.
(For details, see 5.2, "Analog Monitor Output Switching.")
CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
Model No.
XG4C-1034
XG4M-1030-T
Monitor Board
Signal Name
A1 Axis 1 current command value
A2 Axis 1 analog monitor 1 (Monitor item switching)
A3 Axis 1 analog monitor 2 (Monitor item switching)
A4 Axis 1 analog monitor 3 (Monitor item switching)
A5 Axis 2 current command value
A6 Axis 2 analog monitor 1 (Monitor item switching)
A7 Axis 2 analog monitor 2 (Monitor item switching)
A8 Axis 2 analog monitor 3 (Monitor item switching)
A9 Analog GND
A10 Analog GND
Manufacturer
OMRON
OMRON
Signal Description
40