1. Manuals
  2. Brands
  3. Canon Manuals
  4. Scanner
  5. Optura 300
  6. Operation manual

Canon 300 Operation Manual

Canon scanner user manual
Hide thumbs Also See for 300:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual

Operation Guide

Please read this manual before using the scanner.
After you finish reading this manual, keep it in a safe place
for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Canon 300

Summary of Contents for Canon 300

  • Page 1: Operation Guide

    Operation Guide Please read this manual before using the scanner. After you finish reading this manual, keep it in a safe place for future reference.
  • Page 2 If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, Lake Success NY 11042, U.S.A. Tel. No. (516)328-5000 RADIO INTERFERENCE REGULATIONS (For 120 V models)
  • Page 3 ScanFront 300P: Model M11-1051 Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries. • imageFORMULA is a trademark of Canon Electronics Inc.
  • Page 4 MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. Copyright 2010 by CANON ELECTRONICS INC. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical,...
  • Page 5 The ScanFront 300/300P is a network scanner that you can use without connecting to a computer. You can transfer the data of an image scanned with the ScanFront 300/300P to a shared folder on a server PC or client PC on the network or to an FTP server*, send it to a printer for printing**, or deliver it to a remote location via e-mail or Internet fax service.

  • Page 6: Manuals For The Scanner

    ❏ Manuals for the Scanner The following manuals are provided with the Canon ScanFront 300/300P. Be sure to read these manuals thoroughly before using the scanner. Setup Guide Describes the procedure for setting up the scanner for scanning. Set up the ScanFront in accordance with the Setup Guide.

  • Page 7: How This Manual Is Organized

    This chapter provides an overview of the ScanFront. Chapter 2 Handling This chapter describes the types of documents that can be scanned, and the basic operations of the scanner. Chapter 3 Operating Procedures This chapter describes the basic operating procedures for the scanner.

  • Page 8: Table Of Contents

    Cautions for Handling the Fingerprint Sensor ... 2-11 Fingerprint Authentication... 2-12 Chapter 3 Operating Procedures 1. Flow of Scanner Operations ... 3-2 2. Turning the Power ON and OFF ... 3-3 Turning the Power ON... 3-3 Turning the Power OFF ... 3-3 3.
  • Page 9 Chapter 4 Web Menu (User Mode) 1. Web Menu Overview ...4-2 2. Logging In to the Web Menu ...4-3 3. User Settings ...4-4 User Settings ... 4-5 4. Address Book Settings ...4-8 Registering New Addresses ... 4-10 Copying Addresses ... 4-13 Exporting and Importing Address Books ...
  • Page 11 Chapter 1 Before Use 1. Important Safety Instructions ... 1-2 Installation Location ...1-2 Power ...1-2 Moving the Scanner ...1-3 Handling ...1-3 About the Fingerprint Sensor (ScanFront 300P only) ...1-5 Disposal ...1-5 2. Names and Functions of Parts... 1-6 Front and Document Feed and Eject Trays ...1-6...

  • Page 12: Important Safety Instructions

    Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. ❏ Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements.

  • Page 13: Moving The Scanner

    Model: MG1-4314 ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. ❏ Moving the Scanner ● When moving the scanner, always hold it with both hands to avoid dropping it.
  • Page 14 Then, contact your local authorized Canon dealer or service representative for further information. ■ Do not drop the scanner, or subject it to impact or strong shock. Should the scanner ever become damaged, immediately turn the power OFF, and disconnect the power plug from the power outlet.

  • Page 15: About The Fingerprint Sensor (Scanfront 300P Only)

    ❏ Disposal ● Prior to disposing of the scanner, initialize the scanner to ensure that the registered data is deleted. ● When disposing of the scanner, make sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner.

  • Page 16: Names And Functions Of Parts

    Names and Functions of Parts The names and functions of the parts of the ScanFront 300/300P are shown below. ❏ Front and Document Feed and Eject Trays a Tray Extension Open this to prevent scanned documents from slipping off. b Document Eject Tray Open this tray when using the ScanFront.

  • Page 17: Side And Rear

    ❏ Side and Rear m USB Port (Rear Left) Connect a USB1.1/Hi-Speed USB2.0 compatible USB memory device, USB keyboard, or USB mouse. n Power Connector (24 VDC) Connect the plug of the supplied AC adapter. o Kensington Slot This is an anti-theft slot that enables a key chain or lock to be connected to prevent theft.

  • Page 19: Chapter 2 Handling

    Chapter 2 Handling 1. Documents... 2-2 Plain Paper...2-2 Business Card...2-2 Card ...2-3 2. Preparing the Scanner ... 2-4 Preparing the Document Feed Tray and Eject Tray ...2-4 Feed Selection Lever ...2-5 USB Port ...2-5 3. Placing Documents ... 2-6 Placing a Document ...2-6 Placing a Folded Document ...2-7...

  • Page 20: Documents

    Size Width: 2" (50.8 mm) and above Length: 2 1/8" (53.9 mm) and above Thickness 82 lb Cover (300 g/m IMPORTANT • If the stack of business cards that you placed is not fed properly, reduce the number business cards.

  • Page 21: Card

    ❏ Card Size 2.12" × 3.37" (53.9 × 85.5 mm) (Conforming to ISO Standards) Thickness 0.0299" (0.76 mm) and below Insertion orientation Landscape IMPORTANT • Insert cards one at a time. • Be careful when inserting cards to avoid damaging them.

  • Page 22: Preparing The Scanner

    Preparing the Scanner When placing a document in the scanner, pull out the document eject tray so that it matches the size of the document, and then move the feed selection lever to the appropriate position for the desired feed method (Page Separation ON or OFF) for the document.

  • Page 23: Feed Selection Lever

    You can also connect a USB keyboard and USB mouse to operate the ScanFront. IMPORTANT • The scanner will not start if you turn the power ON while a USB memory device is inserted. Insert the USB memory device after the scanner has started up.

  • Page 24: Placing Documents

    Placing Documents When placing documents into the scanner, place them face down into the tray with the top edge of the document at the bottom of tray. ❏ Placing a Document Follow the procedure below to place a document. Adjust the document guides to be wider than the width of the document.

  • Page 25: Placing A Folded Document

    Legal/A4 and therefore do not fit in the feeder. (The maximum size is 11" X 17"/A3.) To use the function, fold the document in half lengthwise and place it into the feeder. The ScanFront 300/300P will scan both sides and combine the scanned images into a single image. IMPORTANT •...

  • Page 26: Placing A Card

    • Pull the lock lever and open the panel unit before removing a placed card. Inserting a finger into the scanner while the panel unit is closed may result in an injury. Lock lever...

  • Page 27: Clearing A Paper Jam Or Double Feed Error

    Clearing a Paper Jam or Double Feed Error When a paper jam or double feed error is detected, feeding and scanning stops. Check the displayed message. If a paper jam or double feed error is detected at the first page of a document, the following messages appear. Hint •...
  • Page 28 IMPORTANT When the message above is displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (See p. 3-3.) Remove the scanned documents from the document eject tray, and any documents remaining in the document feed tray.

  • Page 29: Fingerprint Sensor (Scanfront 300P)

    ● Touching the fingerprint sensor while charged with static electricity may cause the fingerprint sensor or scanner unit to malfunction. Before touching the fingerprint sensor, discharge any static electricity by touching a piece of metal. Be especially careful during dry periods, such as the winter season, when the likelihood of being charged with static electricity is high.

  • Page 30: Fingerprint Authentication

    ❏ Fingerprint Authentication ● Follow the procedure below to use fingerprint registration and authentication. 1. Align the first joint of a finger on the sensor and press the finger on the fingerprint sensor. 2. Keep the finger pressed while slowly sliding it straight at a constant speed to scan the fingerprint.
  • Page 31 Chapter 3 Operating Procedures 1. Flow of Scanner Operations ...3-2 2. Turning the Power ON and OFF...3-3 Turning the Power ON... 3-3 Turning the Power OFF ... 3-3 3. Login Screen ...3-4 Login Screen Types... 3-4 When Using Server Authentication... 3-4 List Type Login ...

  • Page 32: Flow Of Scanner Operations

    Flow of Scanner Operations The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For descriptions of the various settings, refer to the appropriate reference pages. No user is registered...

  • Page 33: Turning The Power On And Off

    Turning the Power ON and OFF Use the power switch to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF. ❏ Turning the Power ON Press the power switch to turn the scanner ON. The power indicator lights, and the Home screen or the login screen appears.

  • Page 34: Login Screen

    Hint • Set the type of login screen from [Device Operation] of the Web menu (refer to p. 6-31 on the ScanFront 300/300P INSTRUCTIONS) or [Login type setting] in the administrator settings of the ScanFront (refer to p. 3-10 on the ScanFront 300/300P INSTRUCTIONS).

  • Page 35: List Type Login

    Press [Password]. The keyboard screen appears. Enter a password and then press [OK]. IMPORTANT Passwords are case-sensitive. Make sure to enter the password correctly. Press [Login] to log in to the scanner. The Home screen (or Job Button screen) appears.

  • Page 36: Key In Type Login

    • If you do not know the user name and password registered for server authentication, contact the domain server administrator. Press [Login] to log in to the scanner. The Home screen (or Job Button screen) appears.

  • Page 37: Fingerprint Authentication (Only Available With The Scanfront 300P)

    ❏ Fingerprint Authentication (Only Available with the ScanFront 300P) Use the procedure below for fingerprint authentication. For details on fingerprint registration, see “Fingerprint Registration (Only Available with the ScanFront 300P)” on p. 3-10. Perform fingerprint authentication using the finger with the registered fingerprint. IMPORTANT Perform finger authentication by gently pressing the finger while slowly sweeping it at a constant speed to scan the fingerprint.

  • Page 38: Screen Displayed After Login

    Screen Displayed after Login You can set the screen (Home screen or Job Button screen) that is displayed after a user logs in. (See p. 4-4.) ❏ Home Screen a Select destination (E-mail, FTP, FAX, Shared folder, USB memory, and Printer) buttons These buttons open an address selection screen.

  • Page 39: User Settings Screen

    User Settings Screen The User Settings screen enables you to edit the user password and register a fingerprint (only available with the ScanFront 300P). ❏ Change Password You can register a new user password or change a user password registered via the Web menu. Hint The old password does not need to be entered in order to change a password.

  • Page 40: Fingerprint Registration (Only Available With The Scanfront 300P)

    Fingerprint Registration (Only Available with the ScanFront 300P) Fingerprint authentication is a function for registering the fingerprints of users that will log in when the device authentication or server authentication method is used, and enables users to log in by authenticating their fingerprints. When fingerprint authentication is used, there is no need to select a user in the list type login screen or enter a user name and password in the key in type login screen.

  • Page 41: Registering A Fingerprint

    ❏ Registering a Fingerprint Register a fingerprint from the User Settings screen accessed from the Home screen. IMPORTANT If the Home screen is not displayed, use of the Home screen has been restricted for the user by the ScanFront administrator. Confirm this with the administrator.
  • Page 42 Perform an authentication test for the registered fingerprint by scanning your fingerprint. Press [Close] to end fingerprint registration. IMPORTANT If you want to change the registered fingerprint, start registration again from the beginning. 3-12...

  • Page 43: Scanning Procedures

    Scanning Procedures You can perform scanning from the Home screen or the Job Button screen. ❏ Scanning From the Home Screen Press a destination selection (E-mail, FTP, Fax, Shared folder, or USB memory) button to open an address selection screen and then select an address to send an image file.

  • Page 44: Scanning From The Job Button Screen

    For details on the overall flow from configuring settings to sending an image file, see “Flow of Scanner Operations” on p. 3-2. • Job buttons cannot be used to save image files to USB memory or send them to printers for printing.

  • Page 45: Address Selection Screen

    ❏ Address Selection Screen From the address selection screen, you can select the address to send an image file and register addresses. a Address Book type Selects the address book type (Shared Address Book or My Address Book). If the address book server setting is enabled, [LDAP Address Book] is added.

  • Page 46: Usb Memory Screen

    ❏ USB Memory Screen The USB Memory screen enables you to specify the folder in the USB memory to save the image file. a Path Enter the folder path of the USB memory. You can also press [Downward] to select a folder. b USB Memory Display Displays the inserted USB memory.

  • Page 47: Print Settings Screen

    ❏ Print Settings Screen The print settings screen enables you to specify the printer, paper size, and other print settings. a Printer name Select the printer that will be used to print the scanned images. Printers that are compatible with the ScanFront Service Server can be selected.

  • Page 48: Scanning

    ❏ Scanning This section describes the procedure for scanning. If you want to save the image file to USB memory, specify the folder in the USB memory to save the image file in Steps 2 to 4. (See “USB Memory Screen” on p. 3-16.) Select a destination.
  • Page 49 Step 10 appears. • When the confirmation message is left displayed and the scanner transitions to Low Power Mode, all of the data scanned up until that point is discarded. (See p. 3-3.) Check the document and go to the next step.
  • Page 50 Check the scanned images. : Display the image of the next page. : Display the image of the previous page. : Move the viewing area around an image when an enlarged view of the image is shown. : Rotate the image 90 degrees counterclockwise. : Rotate the image 90 degrees clockwise.
  • Page 51 Press [Send]. The address confirmation message appears. IMPORTANT If [Confirm addresses before sending] is set to [OFF] in Delivery Options of the Scan/Delivery Options screen, the image is sent without displaying the address confirmation screen and the operation ends. Confirm the address and press [OK] to send the scanned image.

  • Page 52: Registering And Editing Addresses

    Registering and Editing Addresses If an address to which you want to send an image file is not registered in the address book or the information of a registered address has not been updated, use the procedure below to register a new address or modify an address in the address book. ❏...
  • Page 53 Hint If the path of the sub-folder is unknown, use the procedure below to specify the sub-folder. 1. Enter the host name, user name, password, and domain, and then press [Browse] to access the computer that is making the shared folder public. Sub-folders on computers running Windows 7 or Windows Server 2008 R2 cannot be browsed by pressing the [Browse] button.
  • Page 54 Fax Registration Screen • Name Enter the name to appear in the address book. • Fax number Enter the recipient fax number. Group Registration Screen • Name Enter the name that you want to appear in the address book. 3-24 •...

  • Page 55: Modifying An Address

    ❏ Modifying an Address Modify an address when there is a send error because the information of the transfer destination registered for the address is wrong or has been changed. Select the type of the address to modify and press [Details].
  • Page 56 A confirmation message appears. Press [New] and paste the address. Hint If the address book already has an address with the same name as the pasted one, the following message appears. • If you select [New], an address with the same name is created in the address book.

  • Page 57: Scan/Delivery Options

    Scan/Delivery Options This section describes the scan settings and send settings for the scanner. a Address Display Area Displays the selection that you made on the address selection screen or the addresses registered to the job button. b Details Displays detailed information for the address with the colored background.

  • Page 58: Scan Settings

    Select the resolution for scanning. IMPORTANT • A resolution of [300 dpi] or more cannot be set when [Auto size (Long)] is selected for [Page Size]. • A resolution of [400 dpi] or more cannot be set when [Folio] is selected for [Scanning Side].
  • Page 59 (50 mm) or more. It does not function if only a slight portion of the document is overlapping. • When using the ScanFront 300, the [Double feed detection by Ultrasonic] setting is set to [OFF]. • When [Scanning Side] is set to [Folio], [Double feed detection by Ultrasonic] is grayed out and cannot be selected.
  • Page 60 The scanning speed may be reduced when [Auto] is selected. 3-30 Deskew The scanner detects from the scanned image that the document was fed askew and then straightens the image. • Prefer Quality Image processing is performed to minimize the loss of quality of an image that has deteriorated as result of deskewing.
  • Page 61 Hint When using bleed-through reduction, adjust the bleed-through reduction level to match the type of document. Contrast Adjust the contrast for the images to scan. Back side Brightness/contrast This is enabled when you scan both sides of a document and should be used when the document has front and back sides of different density.

  • Page 62: File Formats

    ❏ File Formats You can select from the three available file formats TIFF, JPEG, and PDF, and the modes available for scanning vary, depending on the file format setting. (See “Mode” on p. 3-28.) TIFF format Select [Single page (Front/back separate file)] to save each side of each page as a separate image file, [Single page (Front/back same file)] to save each page as a separate image file, or [Multi page] to save one image file...

  • Page 63: Security Settings For Pdf Files

    ❏ Security Settings for PDF Files Apply security to the PDF file. Encryption Level High (128-bit RC4) and low (40-bit RC4) level settings are available. IMPORTANT Using the High (128-bit RC4) level setting is recommended. The Low (40-bit RC4) level setting provides less security. Requires a password to open the document Viewing of the document is restricted by a password.

  • Page 64: Delivery Options

    Specify a name for the image file to be sent. Auto file name The scanner adds 17 digits that indicate the date and time to the file name of the image to be sent. Ex.) May 14, 2010, 3:40:30 p.m.

  • Page 65: Index

    Screen after sending Select the screen to display after sending images. • Home screen (Job Button screen) Redisplay the Home screen (Job Button screen) after sending images. IMPORTANT • The [Screen after Login] setting that is set via the Web menu by the user applies to the Home screen (Job Button screen) setting.
  • Page 66 3-36...

  • Page 67: Chapter 4 Web Menu (User Mode)

    Chapter 4 Web Menu (User Mode) 1. Web Menu Overview... 4-2 2. Logging In to the Web Menu... 4-3 3. User Settings ... 4-4 User Settings...4-5 4. Address Book Settings... 4-8 Registering New Addresses...4-10 Copying Addresses ...4-13 Exporting and Importing Address Books...4-13 5.

  • Page 68: Web Menu Overview

    • For a Web browser, use Microsoft Internet Explorer 6.0 or later or Firefox 3.5 or later. • In some cases, settings cannot be changed from the Web Menu when the ScanFront administrator or another user is logged in to the scanner.

  • Page 69: Logging In To The Web Menu

    You can log in to the Web Menu using the following procedure. Hint Use the device name or the IP address assigned to the scanner as the URL for accessing the Web Menu. Contact the ScanFront administrator for the device name and the IP address.

  • Page 70: User Settings

    User Settings From the User Settings screen, you can change the information of a user logged in by Device Authentication. a Setting (See “User Settings” on p. 4-4) Allows you to edit a user’s settings.

  • Page 71: User Settings

    • When entering a [Password], select the [Change Password] check box before entry. • [Change Password] updates the password information saved on the scanner, but does not alter the password registered on the server. • For a user logged in by Server Authentication, you can only select a setting for [Screen after Login].
  • Page 72 Custom File Name Settings Specify the method in which file names used for saving scanned images are created. When you select to use custom file names during a scanning procedure, the image files will be saved under file names that are determined by the settings configured here.
  • Page 73 • Index string/Field name Enter a string for the index. You can change the default field name (“String”) as necessary. • User name Select the [Enable] check box to include the user name in the index file. You can change the default field name (“User”) as necessary.

  • Page 74: Address Book Settings

    LDAP address book has been granted to the user. The address type is set to [E-mail] when the LDAP Address Book is selected. b Export from ScanFront 300 Exports the address book data as a file in CSV format. (See “Exporting and Importing Address Books” on p. 4-13.) c Import to ScanFront 300 Imports a previously exported address book data file.
  • Page 75 IMPORTANT If the ScanFront administrator has restricted editing of the address books, the following Address Book settings apply. For details, consult the ScanFront administrator. • If editing is restricted for only one address book (either the My Address Book or the Shared Address Book), users can only copy addresses from the restricted address book and paste them into the unrestricted address book.

  • Page 76: Registering New Addresses

    (E-mail, FTP Server, Shared folder, Fax, or Group). Address type: E-mail This option registers an e-mail address. Name Enter the name to display on the scanner. E-mail Address Enter the destination e-mail address. [OK] button Registers a new e-mail address with the specified parameters.
  • Page 77 This option registers a folder shared publicly on the network. Name Enter the name to display on the scanner. Computer Name (Host Name) Enter the name of the computer containing the publicly shared folder. When the ScanFront Service is running, you can enter the IP address instead of a host name.
  • Page 78 99 addresses can be registered to 1 group. Name Enter the name to display on the scanner. Add from Address Book Allows you to select an address from an address book, add it to the group, and display it in the list.

  • Page 79: Copying Addresses

    ScanFront unit to the other units. Exporting from the Scanner You can save the address book data to a specified folder. Click [Export from ScanFront 300]. Click [Save], specify a save location, and save the address book data.
  • Page 80 Importing to the Scanner You can import previously exported address book data to the scanner. Click [Import to ScanFront 300]. Click [Browse] and specify a previously exported address book settings file. Select a processing method for importing the address book settings file.

  • Page 81: Job Button Settings

    Select the job button (Shared Job Button or My Job Button) that you want to edit. b Export from ScanFront 300 Exports the job button data as a file in DAT format. (See “Exporting and Importing Job Buttons” on p. 4-23.) c Import to ScanFront 300 Imports a previously exported job button data file.
  • Page 82 IMPORTANT If the ScanFront administrator has restricted editing of the job buttons, the following Job Button settings apply. For details, consult the ScanFront administrator. • If editing is restricted for only one set of job buttons (either the My Job Button or the Shared Job Button), users can copy job buttons from the restricted set of job buttons and paste them into the unrestricted set.

  • Page 83: Registering New Job Buttons

    ❏ Registering New Job Buttons Click [New Job Button] to register a new job button. Job Button Settings Name of Job Button Enter the job button name to display on the touch panel. Hint • Job buttons are sorted and displayed by job button name. If you want to set to display job buttons in a particular order, insert sequential letters or numbers before the name when registering each job button.

  • Page 84: Scan Settings Overview

    • The [Auto size] option automatically detects the size of the scanned document during scanning. • When scanning a long document, select [Auto size (Long)] IMPORTANT A resolution of [300 dpi] or more cannot be set when [Auto size (Long)] is selected.
  • Page 85 Auto Color Detection • When [Text enhance] is selected, [Bleed-through reduction] cannot be selected. Resolution (dpi) Select the scanning resolution (100, 150, 200, 300, 400, or 600 dpi). Scanning Side Select the method for scanning the document (Simplex, Duplex, Skip blank page, Folio).
  • Page 86 Add Date to File name The scanner adds 17 digits that indicate the date and time to the file name of the image to be sent. Ex.) May 14, 2010, 3:40:30 p.m. yyyymmdd: File name + 20100514154030123 mmddyyyy: File name + 05142010154030123 ddmmyyyy: File name + 14052010154030123 * The last three digits indicate the number of milliseconds.
  • Page 87 [Same as front] check box. Double feed detection by Ultrasonic (Only available with the ScanFront 300P) The scanner uses an ultrasonic sensor to detect when two or more documents are fed together, and stops feeding when a double feed is detected.

  • Page 88: Copying Job Buttons

    Document orientation Rotates the scanned image to the specified angle. Hint When [Auto] is selected, the scanner detects text orientation within the document and rotates the image so that the orientation of the text is correct. IMPORTANT The scanning speed may be reduced when [Auto] is selected.

  • Page 89: Editing Jobs

    ScanFront unit to the other units. Exporting from the Scanner You can save the job button settings file to a specified folder. Click [Export from ScanFront 300]. Click [Save], specify a save location, and save the job button settings file. Importing to the Scanner You can import a previously exported job button settings file to the scanner.
  • Page 90 Click [Execute]. Confirm the message that appears, and click [OK] to import the data. Hint When importing is completed, the following message appears. Click [OK] to return to Job Button Settings and confirm the imported job button. 4-24...

  • Page 91: Chapter 5 Troubleshooting

    Chapter 5 Troubleshooting 1. Troubleshooting ... 5-2...

  • Page 92: Troubleshooting

    The administrator has set user function restrictions. Solution Contact the administrator of the ScanFront. The scanner cannot connect to an FTP server that requires firewall Cause settings to be configured. Use an FTP server that does not require firewall settings to be Solution configured.
  • Page 93 ScanFront Service Server has not been configured or is not running.) Install ScanFront Service on a computer on the same network as the scanner. If a ScanFront Service Server has been implemented, check the necessary settings. In addition, you must start the ScanFront Service...
  • Page 94 I press a job button (certain users only) Scan Cause The scanning glass is dirty. Refer to the ScanFront 300/300P INSTRUCTIONS (electronic manual) Solution and clean the scanning glass. If there are scratches on a scanning glass, contact your local authorized Canon dealer. Cause The rollers are dirty.
  • Page 95 Check the connections of the AC adapter and power plug. If the problem is not resolved after checking the connections, contact your local authorized Canon dealer. A USB memory device in inserted in the scanner. Remove the USB memory device, and restart the scanner.

  • Page 97: Index

    Chapter 6 Index 1. Index ... 6-2...
  • Page 98 Index AC Adapter ... 1-7 Address Copying ...3-25, 4-13 Modifying ... 3-25 New ...3-22, 4-10 Address Book Settings ... 4-8 Address Selection Screen ... 3-15 Address Type E-mail ...3-22, 4-10 Fax ... 4-12 FTP Server ...3-23, 4-10 Group ...3-24, 4-12 Shared Folder ...3-22, 4-11 Card ...
  • Page 99 Moving the Scanner ... 1-3 Names and Functions of Parts ... 1-6 Paper Jam ... 2-9 Placing a Card ... 2-8 Placing a Folded Document ... 2-7 Placing a Long Document ... 2-7 Placing Documents ... 2-6 Plain Paper ... 2-2 Preparing the Scanner ...
  • Page 100 CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC.

This manual is also suitable for:

Imageformula scanfront 300pScanfront 300Imageformula scanfront 300

Table of Contents