Canon GALVANO GC-251 User Manual page 33

⑤ Servo ON/OFF
High-speed serial
⑥ communication
selection
⑦
Tab selection
⑧ Control display
⑨
Status display
⑩ Soft reset
Command input
⑪
screen
⑫ DSP version
CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
Starting origin detection
Start or stop servo control.
Select the high-speed serial communication command or internal
command for position specification. (For details, see Chapter 4.)
(Start = High-speed serial communication, OFF = Internal
command)
The screen of each function can be displayed by tab selection.
(A detailed explanation of the screen is shown when each function
is displayed.)
This area displays the screen of each function selected by a tab at
⑦.
The controller status of two axes is displayed.
Press this button for soft reset.
Allows direct command input.
The version of the controller software is displayed.
During troubleshooting, the support staff may ask for the version
number.
33