10.16
Handlebar position
10.17
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
(All standard models)
The holes on the handlebar support
A
distance of
Hole distance A
The handlebar can be mounted in 2 different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
Info
In addition, the handlebar can be mounted rigidly or on
a rubber bearing.
A01168-10
(350 XC‑F US Factory Edition)
The holes on the handlebar support
A
distance of
Hole distance A
The handlebar can be mounted in 2 different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
Info
In addition, the handlebar can be mounted rigidly or on
a rubber bearing.
F03636-10
TUNING THE CHASSIS 10
1
are placed at a
from the center.
3.5 mm (0.138 in)
1
are placed at a
from the center.
3.5 mm (0.138 in)
49