15.11
Adjusting the headlight range
15.12
Changing the combination instrument battery
»
If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
V00369-10
If you have a payload, you may have to correct the
headlight range.
–
Tighten screw
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Remove screws
–
Pull the combination instrument upward out of the holder.
E00901-10
–
Using a coin, turn protection cap
wise and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing
outward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
V00371-10
ELECTRICAL SYSTEM 15
p. 121)
p. 120)
1
.
1
.
1
.
2
all the way counterclock-
3
p. 118)
.
p. 158)
121