Configuring Custom Services - Fortinet FortiGate FortiGate-500A Administration Manual

Firewall

Configuring custom services

FortiGate-500A Administration Guide
Source Port
Destination Port Specify the Destination Port number range for the service by entering the
ICMP custom service options
Figure 91: ICMP custom service options
Name
Protocol Type
Type
Code
IP custom service options
Figure 92: IP custom service options
Name
Protocol Type
Protocol Number The IP protocol number for the service.
To add a custom TCP or UDP service
1 Go to Firewall > Service > Custom.
2 Select Create New.
3 Enter a name for the new custom TCP or UDP service.
4 Select TCP or UDP as the Protocol Type.
Specify the Source Port number range for the service by entering the low
and high port numbers. If the service uses one port number, enter this
number in both the low and high fields.
low and high port numbers. If the service uses one port number, enter this
number in both the low and high fields.
The name of the ICMP custom service.
Select the protocol type of the service you are adding (ICMP).
Enter the ICMP type number for the service.
Enter the ICMP code number for the service if required.
The name of the IP custom service.
Select the protocol type of the service you are adding: IP.
01-28006-0100-20041105
Service
211