Configuring Address Groups; Service - Fortinet FortiGate FortiGate-500A Administration Manual
Fortinet fortigate fortigate-500a: user guide
Hide thumbs
Also See for FortiGate FortiGate-500A:
- Install manual (56 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
Service
Configuring address groups
Service
206
To organize addresses into an address group
1
Go to Firewall > Address > Group.
2
Select Create New.
3
Enter a group name to identify the address group.
4
Select an address from the Available Addresses list and select the right arrow to move
the address into the group.
5
Repeat step 4 as required to add more addresses to the group.
6
Select OK.
To delete an address group
If an address group is included in a policy, it cannot be deleted unless it is first
removed from the policy.
1
Go to Firewall > Address > Group.
2
Select the Delete icon beside the address group you want to delete.
3
Select OK.
To edit an address group
1
Go to Firewall > Address > Group.
2
Select the Edit icon beside the address group you want to modify.
3
Make any required changes.
Note: To change the address group name you must delete the address group and add it with a
new name.
4
Select OK.
Use services to determine the types of communication accepted or denied by the
firewall. You can add any of the predefined services to a policy. You can also create
custom services and add services to service groups.
This section describes:
•
Predefined service list
•
Custom service list
•
Custom service options
•
Configuring custom services
•
Service group list
•
Service group options
•
Configuring service groups
01-28006-0100-20041105
Firewall
Fortinet Inc.
Advertisement
Table of Contents
