ELECTRICAL HAZARD:
ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT THE FOLLOWING
PROCEDURES.
NUR QUALIFIEZIERTE SERVICE PERSONNAL DIE FOLGENDE PROCEDURE
FOLGEN SOLLTEN.
SOLAMENTE PERSONAL CALIFICADO DEBE INTENTAR ESTE PROCEDIMIENTO.
The top cover must be removed to gain access to the mode bank switches, and to install an optional
DRAM Single In-line Memory Modules (SIMMs).
This appendix covers the following items:
•
Required tools
(Section
•
Removing the chassis cover
•
Locations, functions, and settings for the mode switches
•
Replacing SIMMs
B.1
REQUIRED TOOLS
Use the following tools to perform the procedures provided in this appendix:
•
Antistatic wrist strap
•
Phillips screwdriver
Mode Switch Bank Settings
B.1)
(Section
B.2)
(Section
B.4)
Optional Installations and Mode Switch Bank Settings
Optional Installations and
(Section
B.3)
B
B-1