Table of Contents
Advertisement
Installing the Device
3.7
INSTALLING THE DEVICE
For a tabletop or shelf installation, locate the device within seven feet of its power source and on an
unrestricted free surface area as shown in
connection instructions.
CAUTION: To ensure proper ventilation and prevent overheating, leave a minimum
clearance space of 5.1 cm (2.0 in) at the left, right, and rear of the device.
Figure 3-7 Clearance Required for Tabletop or Shelf Installation
3.7.1
Rackmount Installation
To install the device in a 19-inch rack, you need following items shipped with the device:
•
A strain-relief bracket and mounting screws (cable management kit)
•
Two rackmount brackets and mounting screws (rackmount kit)
Also needed are four user-supplied screws to attach the device to a standard 19-inch rack.
3-16
Hardware Installation
Figure
3-7. Proceed to
Section 3.7.4
for power
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
