Table of Contents
Advertisement
4.3
USING THE RESET BUTTON
The Reset button shown in
CAUTION: Pressing the Reset button resets the device, and all current switching being
performed by the module is halted. A network downtime of up to two minutes could
result from this action for any devices connected to the device.
Figure 4-2 Reset Button
Reset Button
To reset the device processor, press and release the Reset button
reset process for approximately 30 seconds. Additional downtime may result as the module
reenters the network.
NOTE: Pressing the Reset button while the device is already in reset mode is not
recommended. If the Reset button is pressed while the device is in reset mode, the
module will enter an extended diagnostic procedure, which is unnecessary for normal
operation. This extended diagnostic procedure takes longer than two minutes to
complete.
Figure 4-1
resets and re-initializes the device.
À
Using the Reset Button
. The device goes through a
Troubleshooting
4-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
