deicer system is canceled and the
system stops operating.
Headlight washer (if
equipped)
If you pull the wiper control lever toward
you and hold it for more than 1 second
with the ignition switch in the "ON"
position, the headlight washer operates
together with the windshield washer in the
following conditions.
. when the light switch is in the "
position (except Australia models)
. when the light switch is in the "
position (Australia models)
. when the light switch is in the "AUTO"
position and the headlights illuminate
automatically (models with auto on/off
headlights)
The windshield washer stops spraying
Instruments and controls/Headlight washer
washer fluid as soon as you release the
wiper control lever. The headlight washer
sprays the washer fluid for approximately
1 second and then stops automatically.
CAUTION
. Do not operate the washer if the
washer fluid tank is empty. This
may cause overheating of the
washer motor. Check washer
fluid level frequently, such as at
fuel stops.
. Do not use a strong cleaning
agent as a windshield washer
fluid. This may cause cracking
of the headlight lenses.
. We recommend that you wash
the headlight lenses with water
frequently when you have used
high-concentrated windshield
washer fluid in cold weather.
"
NOTE
"
. When the area around the nozzle
cover of the headlight washer is frozen,
remove the ice before using.
. When the headlights are very dirty,
perform the operation repeatedly.
3-73