Selecting Audible Signal Operation; Selecting Hazard Warning Flasher Operation; Warning Chimes And Warning Indicator; When Access Key Fob Does Not Operate Properly - Subaru Ascent 2023 Manual

130
Keyless access with push-button start system
! Enabling functions
When the procedure to disable the func-
tions is performed again, a chirp will
sound, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the
procedure in the same manner used
to disable the function (for example,
when disabling by operating the
driver's door, the function will not
be enabled even if you operate the
access key fob).
. Press the push-button ignition
switch if you do not know the
procedure in which the keyless
access function was disabled.
– When disabling by operating the
driver's door: A chirp will not
sound.
– When disabling by operating the
access key fob: A chirp will
sound.
& Selecting audible signal op-
eration
Using an electronic chirp, the system will
give you an audible signal when the doors
are locked or unlocked. If desired, you can
turn the audible signal off by operating the
center information display. For details,
refer to "Car settings" �P215.
Furthermore, the volume setting of the
audible signal can also be changed by a
SUBARU dealer. Consult your SUBARU
dealer for details.
& Selecting hazard warning
flasher operation
Using the hazard warning flasher, the
system will give you a visible signal when
the doors are locked or unlocked. If
desired, you can turn the hazard warning
flashers off by operating the center infor-
mation display. For details, refer to "Car
settings" �P215. The setting can also be
changed by a SUBARU dealer. Consult
your SUBARU dealer for details.
& Warning chimes and warning
indicator
The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to "Warning chimes and
warning indicator of the keyless access
with push-button start system" �P186.
& When access key fob does
not operate properly
Refer to "Access key fob – if access key
fob does not operate properly" �P464.
& Replacing battery of access
key fob
Refer to "Replacing battery of access key
fob" �P517.
& Replacing access key fob
Access key fobs can be replaced by a
SUBARU dealer. For more details, contact
a SUBARU dealer.
& Certification for keyless ac-
cess with push-button start
system
. U.S.-spec. models
FCC ID: HYQ14AKB
FCC ID: Y8PSU19S-3
FCC ID: Y8PSSPIMB02
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void