Network Monitoring - D-Link DGS-3224TG User Manual

DGS-3224TG Gigabit Ethernet Switch User's Guide
The following fields can then be set:
•
Baud Rate:<9600> – Sets the serial bit rate that will be used to communicate the next time
the switch is restarted. Available speeds are 9600, 19200, 38400 and 115200 bits per
second. The default setting is 9600.
•
Data Bits:<8> – Select 7 or 8. The default is 7.
•
Parity:<None> – Choose from None, Even or Odd. The default is None.
•
Stop Bits:<1> – Select 1 or 2. The default is 1.
•
Auto-Logout:<Never> – This sets the time the interface can be idle before the switch
automatically logs-out the user. The options are 2 mins, 5 mins, 10 mins, 15 mins, or Never.
•
Serial Port For:<Console> – Change this field to SLIP and enter the appropriate information
in the Interface Name, Local IP Address, Remote IP Address, and MTU fields which
become active once SLIP is selected.

Network Monitoring

The DGS-3224TG provides extensive network monitoring capabilities.
To display the network data compiled by the switch, highlight Network Monitoring on the main menu
and press Enter.
Figure 6-34. Serial Port and SLIP Settings screen
61