Table of Contents
Advertisement
This chapter provides unpacking and setup information for the Switch.
Unpacking
Open the shipping carton of the switch and carefully unpack its contents. The carton should contain
the following items:
•
One DGS-3224TG 24-Port Gigabit Ethernet Switch
•
Mounting kit: 2 mounting brackets and screws
•
Four rubber feet with adhesive backing
•
One AC power cord
•
This User's Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
Installation
Use the following guidelines when choosing a place to install the switch:
•
The surface must support at least 6.5 kg.
•
The power outlet should be within 1.82 meters (6 feet) of the device.
•
Visually inspect the power cord and see that it is secured to the AC power connector.
•
Make sure that there is proper heat dissipation from and adequate ventilation around the switch.
Do not place heavy objects on the switch.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the device should first
be attached. Attach these cushioning feet on the bottom at each corner of the device. Allow adequate
space for ventilation between the device and the objects around it.
U
NPACKING AND
4
DGS-3224TG Gigabit Ethernet Switch User's Guide
2
S
ETUP
Advertisement
Table of Contents
Troubleshooting
