Port Configuration - D-Link DGS-3224TG User Manual

DGS-3224TG Gigabit Ethernet Switch User's Guide

Port Configuration

Select the port you want to configure by using the drop-down menus in the From and To fields. Follow
these steps:
1. Enable or disable the port. If you choose Disabled in the State field, devices connected to that
port cannot use the switch, and the switch purges their addresses from its address table after
the MAC address aging time elapses.
2. Configure the Speed/Duplex setting for the twenty 10/100/1000 ports. Select Auto to allow the
port to select the best transmission speed, duplex mode, and flow control settings based on the
Figure 7-4. Port Configuration window
85