Save Settings - D-Link DGS-3224TG User Manual

Managed 24-port gigabit ethernet switch
Hide thumbs Also See for DGS-3224TG:
Table of Contents

Advertisement

DGS-3224TG Gigabit Ethernet Switch User's Guide
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file
name of the firmware file for the switch. Click Apply to enter the server's IP address into the switch's
RAM (use Save Changes to enter the address into the switch's non-volatile RAM). Click Start to initiate
the file transfer.
The information is described as follows:
Server IP Address – The IP address of the TFTP server.
File Name – The full file name (including path) of the new firmware file on the TFTP server.

Save Settings

The switch's current settings can be uploaded to a TFTP Server by the switch's management agent.
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file
name of the firmware file for the switch. Click Apply to enter the server's IP address into the switch's
RAM (use Save Changes to enter the address into the switch's non-volatile RAM). Click Start to initiate
the file transfer.
Please note that if the user does not save configurations to NV-RAM, the configurations the user is
uploading to a TFTP server will not be saved correctly.
The information is described as follows:
Server IP Address – The IP address of the TFTP server.
File Name – The full file name (including path) of the new firmware file on the TFTP server.
Save History Log
The switch's management agent can upload its history log file to a TFTP server.
Please note that an empty history file on the TFTP server must exist on the server before the switch can
upload its history file.
Figure 7-45. Use Configuration File on Server window
Figure 7-46. Save Settings To TFTP Server window
119

Advertisement

Table of Contents
loading

Table of Contents