Configuration - D-Link DGS-3224TG User Manual

5. If the privilege level is to be changed, toggle the Access Level field until the appropriate level
is displayed – Root, User+ or User.
6. Highlight APPLY and press Enter to make the change effective.
7. You must enter the configuration changes into the non-volatile ram (NV-RAM) using Save
Changes from the main menu if you want the configuration to be used after a switch reboot.
Only a user with Root privileges can make changes to user accounts.
Viewing Current User Accounts
Access to the console, whether using the console port or via Telnet, is controlled using a user name and
password. Up to eight user accounts can be created. The console interface will not let you delete the
current logged-in user, to prevent accidentally deleting all of the users with Root privilege.
Only users with the Root privilege can delete users.
To view the current user accounts, highlight User Accounts Management from the main menu. The
current user accounts can be read from the Setup User Accounts screen.
Deleting a User Account
1. Toggle the Action field to Delete.
2. Enter the Username for the account you want to delete. You must enter the password for the
account to be able to delete it.
3. Highlight APPLY and press Enter to make the deletion of the selected user take effect.
4. You must enter the configuration changes into the non-volatile ram (NV-RAM) using Save
Changes from the main menu if you want the configuration to be used after a switch reboot.
Only users with root privileges can delete user accounts.

Configuration

This section will help prepare the switch user by describing the Remote Management Setup, Switch
Information, Configure Advanced Switch Features, Configure Ports, Configure Spanning Tree,
Port Spanning Tree Settings, Setup Unicast Forwarding Table, Setup Static Multicast Forwarding
Table, IEEE 802.1Q VLANs Configuration, 802.1Q Static VLAN Settings, Port VLAN assignment,
Ingress Filter Settings, Port GVRP Settings, IGMP Snooping Settings, Link Aggregation, Setup
Port Mirroring, Class of Service Configuration, Port Default Priority assignment, Traffic Class
Configuration, and Serial Port and SLIP Settings screens, all of which can be found under the
Configuration menu, along with various submenus.
DGS-3224TG Gigabit Ethernet Switch User's Guide
38