D-Link DGS-3224TG User Manual page 68

This menu allows you to set the following features:
•
Max. Packets – Use the space bar in this column to select the maximum number of packets the
Class of Service priority queue can hold. The range of values is from 0 to 512 packets.
•
Max. Latency – The maximum allowable time a packet will stay in the CoS queue, in microseconds
and seconds. The packets in this queue are not delayed more than the maximum allowable latency
entered in this field. Maximum latency takes precedence over the CoS scheduling algorithm.
In addition, clicking ADVANCED SETTINGS at the bottom of the Class of Service Configuration menu
will enable you to select the desired port queue priority:
Figure 6-30. Class of Service Configuration menu
DGS-3224TG Gigabit Ethernet Switch User's Guide
58