Configure Igmp Snooping - D-Link DGS-3224TG User Manual

DGS-3224TG Gigabit Ethernet Switch User's Guide
Figure 6-25. Port GVRP Settings screen
This screen allows you to enable or disable GARP VLAN Registration Protocol (GVRP), where GARP is
the Generic Attribute Registration Protocol, on individual ports. Enter the range of ports to be
configured in the first two fields and then toggle the GVRP State to On. Press APPLY to let your changes
take effect.
GVRP updates dynamic VLAN registration entries and communicates the new VLAN information across
the network. This allows, among other things, for stations to physically move to other switch ports and
keep their same VLAN settings, without having to reconfigure VLAN settings on the switch.

Configure IGMP Snooping

IGMP Snooping can be globally enabled or disabled from the IGMP Snooping Settings screen.
To configure IGMP Snooping, highlight Configure IGMP Snooping on the Configuration menu and
press Enter.
53