Switch Information - D-Link DGS-3224TG User Manual

DGS-3224TG Gigabit Ethernet Switch User's Guide

Switch Information

To set basic switch settings, enter a System Name in the first field, the physical location of the switch
in the System Location field, and the name of the contact person responsible for the switch in the
System Contact field. Then click Apply.
The information is described as follows:
•
Device Type – A description of the switch type.
•
MAC Address – The Ethernet address for the device.
•
Boot PROM Version – Version number for the firmware chip. This information is needed for
new runtime software downloads.
•
Firmware Version – Version number of the firmware installed on the switch. This can be
updated by using the Update Firmware window in the Reset and Update section.
•
H/W Version – Version of the switch hardware.
•
System Name – A user-assigned name for the switch.
•
System Location – A user-assigned description for the physical location of the switch.
•
System Contact – Name of the person to contact should there be any problems or questions
with the system. You may also want to include a phone number or extension.
Figure 7-2. Switch Information (Basic Settings) window
83