D-Link DGS-3224TG User Manual page 47

DGS-3224TG Gigabit Ethernet Switch User's Guide
purchased. The Load Factory Default Configuration Except IP Address option is used when the switch
will be managed by the Telnet manager, which requires knowledge of the switch's IP address to function.
Logging Onto The Switch Console
To log in once you have created a registered user, from the login screen:
1. Type in your Username and press Enter.
2. Type in your Password and press Enter.
3. The main menu screen will be displayed based on your access level or privilege.
Updating or Deleting User Accounts
To update or delete a user password:
Choose User Accounts Management from the main menu. The following Setup User Accounts
screen appears:
1. Toggle the Action field using the space bar to choose Add, Update, or Delete.
2. Type in the Username for the user account you wish to change.
3. You can now modify the password or the privilege level for this user account.
4. If the password is to be changed, type in the New Password you have chosen, and press
Enter. Type in the same new password in the following field to verify that you have not
mistyped it.
Figure 6-9. Setup User Accounts screen
37