Note: Observe the following formulas when setting the above parameters:
Max. Age ≤ 2 x (Forward Delay - 1 second)
Max. Age ≥ 2 x (Hello Time + 1 second)
Port Spanning Tree Settings
In addition to setting Spanning Tree parameters for use on the switch level, the DGS-3224TG allows for
the configuration of Spanning Tree Protocol on individual ports.
To define individual ports, highlight Port Settings on the Configure Spanning Tree menu above and
press Enter.
Toggle the View Ports field to the range of ports to be configured. Enter the port number or port range
in the Configure Port from [ ] to [ ] field. After enabling or disabling STP Status, you can set the
spanning tree port cost and priority.
Configure Static (Destination-Address Forwarding) Table
The Configure Static (Destination-Address Forwarding) Table menu allows you to access screens to
create, modify, and delete both Static Unicast Forwarding Table and Static Multicast Forwarding Table
entries, respectively.
Highlight Configure Static (Destination-Address Forwarding) Table on the Configuration menu and
press Enter:
Figure 6-17. Port Spanning Tree Settings screen
46
DGS-3224TG Gigabit Ethernet Switch User's Guide