Maintenance; Tftp Services - D-Link DGS-3224TG User Manual

•
Current Egress Ports – Displays the current egress ports on the VLAN.
•
Current Untagged Ports – Displays the current untagged ports on the VLAN.

Maintenance

This category includes TFTP Services (Update Firmware, Configuration File, Save Settings, and
Save History Log), Switch History, Ping Test, Save Changes, Factory Reset, Restart System,
Connection Timeout, and Logout.

TFTP Services

Trivial File Transfer Protocol (TFTP) services allow the switch firmware to be upgraded by downloading a
new firmware file from a TFTP server to the switch. A configuration file can also be loaded into the
switch, and switch settings can be saved to a TFTP server. In addition, the switch's history log can be
uploaded to a TFTP server.
Please note that TFTP server software must be running on the management station for the TFTP
services listed here to work.
Update Firmware
Enter the IP address of the TFTP Server in the Server IP Address field and the complete path and file
name of the firmware file for the switch. Click Apply to enter the server's IP address into the switch's
RAM (use Save Changes to enter the address into the switch's non-volatile RAM). Click Start to initiate
the file transfer.
The information is described as follows:
•
Server IP Address – The IP address of the TFTP server.
•
File Name – The full file name (including path) of the new firmware file on the TFTP server.
Configuration File
A configuration file can be downloaded from a TFTP server to the switch. This file is then used by the
switch to configure itself.
Figure 7-44. Update Firmware from Server window
DGS-3224TG Gigabit Ethernet Switch User's Guide
118