This window allows you to set a default priority for packets that have not already been assigned a
priority value. After filling out the two fields offered, click Apply to let your changes take effect.
Class of Traffic
This window allows you to configure traffic class priority by specifying the class value, from 0 to 3, of
the switch's eight levels of priority. Click Apply to let your changes take effect.
Class of Service
This window allows you to set the following features:
•
Max. Packets – The Class of Service scheduling algorithm starts from the highest CoS for a given
port, sends the maximum number of packets, then moves on to the next lower CoS. The values that
Figure 7-16. Default Port Priority assignment window
Figure 7-17. Traffic Class Configuration window
Figure 7-18. Class of Service Configuration window
DGS-3224TG Gigabit Ethernet Switch User's Guide
96