Configure Ip Address - D-Link DGS-3224TG User Manual

DGS-3224TG Gigabit Ethernet Switch User's Guide
Figure 6-10. Configuration menu

Configure IP Address

Some settings must be entered to allow the switch to be managed from an SNMP-based Network
Management System such as SNMP v1 or to be able to access the switch using the Telnet protocol.
The Remote Management Setup screen lets you specify how the switch will be assigned an IP address
to allow the switch to be identified on the network.
To setup the switch for remote management, highlight Configure IP Address from the Configuration
menu. The following screen appears:
39