Errors - D-Link DGS-3224TG User Manual

The information is described as follows:
•
Time Interval – Select the desired setting between 1s and 60s, where "s" stands for seconds.
The default value is one second.
•
Record Number – Select number of times the switch will be polled between 20 and 200. The
default value is 20.
•
Bytes – Counts the number of bytes successfully sent from the port.
•
Packets – Counts the number of packets successfully sent on the port.
•
Show/Hide – Check whether or not to display Bytes and Packets.
•
Clear – Clicking this button clears all statistics counters on this window.
•
View Table – Clicking this button instructs the switch to display a table rather than a line
graph.
•
View Line Chart – Clicking this button instructs the switch to display a line graph rather than a
table.

Errors

The Web Manager allows port error statistics compiled by the switch's management agent to be viewed
as either a line graph or a table. The four windows offered are as follows:
Figure 7-32. Tx Packets Analysis window (Table)
DGS-3224TG Gigabit Ethernet Switch User's Guide
108