D-Link DGS-3224TG User Manual page 43

DGS-3224TG Gigabit Ethernet Switch User's Guide
From the main menu, highlight User Accounts Management and press Enter, then the Setup User
Accounts screen appears.
1. Toggle the Action field to <Add> using the space bar. This will allow the addition of a new user. The
other options are <Delete> - this allows the deletion of a user entry, and <Update> - this allows for
changes to be made to an existing user entry.
2. Enter the new user name, assign an initial password, and then confirm the new password.
Determine whether the new user should have <Root>, <User+>, or <User> privileges. The space bar
toggles between the three options.
3. Highlight APPLY and press Enter to make the user addition effective.
4. Press Esc. to return to the previous screen or Ctrl+T to go to the root screen.
5. A listing of all user accounts and access levels is shown below the user setup menu. This list is
updated when APPLY is executed.
6. Please remember that APPLY makes changes to the switch configuration for the current session
only. All changes (including User additions or updates) must be entered into non-volatile ram using
the Save Changes command on the main menu - if you want these changes to be permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges: Root and User+, and User. Some menu selections available to
users with Root privileges may not be available to those with User+ and User privileges.
The following table summarizes the Root, User+ and User privileges:
After establishing a User Account with Root-level privileges, press Esc. Then highlight Save Changes
and press Enter (see below). The Switch will save any changes to its non-volatile ram and reboot. You
can logon again and are now ready to continue configuring the Switch.
Switch Configuration
Management
Configuration
Network Monitoring
Community Strings and
Stations
Update Firmware and Configuration
Files
System Utilities
Factory Reset
Reboot Switch
User Accounts Management
Add/Update/Delete User Accounts
View User Accounts
Table 6-1. Root, User+, and User Privileges
Privilege
Root User+
Yes Read Only
Yes Read Only
Trap Yes Read Only
Yes No
Yes Ping Only
Yes No
Yes Yes
Yes No
Yes No
33
User
Read Only
Read Only
Read Only
No
Ping Only
No
No
No
No