Stp Instance Settings - D-Link DAS-3626 User Manual

The window above contains the following information:
Parameter
Configuration Name
Revision Level
(0-65535)
MSTI ID
Type
VID List (1-4094)
Click Apply to implement changes. Click Edit to modify an entry and Delete to remove an entry.

STP Instance Settings

This table is used to create STP Instance Settings on the switch. An STP instance may have multiple members with
the same MSTP configuration. There is no limit to the number of STP regions in a network but each region only
supports a maximum of 16 spanning tree instances (one unchangeable default entry). VIDs can belong to only one
spanning tree instance at a time.
To view this window, click Switch Configuration > Spanning Tree > STP Instance Settings as shown below:
DAS-3626 VDSL2 Switch User Manual
Figure 45. MST Configuration Identification menu
Description
A previously configured name set on the switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the MAC
address to the device running MSTP. This field can be set in the STP Bridge Global Set-
tings window.
This value, along with the Configuration Name will identify the MSTP region configured on
the switch. The user may choose a value between 0 and 65535 with a default setting of 0.
This field shows the MSTI IDs currently set on the switch. This field will always have the
CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will
open a new window for configuring parameters associated with that particular MSTI.
This field allows the user to choose a desired method for altering the MSTI settings. The
user has two choices.
Add VID – Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List
parameter.
Remove VID – Select this parameter to remove VIDs from the MSTI ID, in conjunction with
the VID List parameter.
This field displays the VLAN IDs associated with the specific MSTI.
45