Mounting Options; Touchpanel Mounting - Crestron TPS-12 Operation Manual

®
Crestron Isys TPS-12G/15G-QM-L
Operations Guide – DOC. 6356

Mounting Options

The TPS-12G/15G-L touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. All mounting options are provided separately from the actual touchpanel.
Refer to the table after this paragraph for a complete list of mounting options.
Mounting Options for the TPS-12G/15G-L
PRE-
CONSTRUCTION
OPTION
Back Box Kit
Pre-Construction
Mount Kit
Mud Mount Kit
(Accessory)
Trim Mount Kit
(Accessory)
-
-
NOTE: Pre-construction refers to framed walls prior to hanging drywall.
Post-construction refers to framed walls with drywall hung.
NOTE: Rack mounting kits (RMK-12L and RMK-15L) are also available for these
touchpanels. Refer to the latest versions of the RMK-12L and RMK-15L Installation
Guides (Docs. 6361 and 6366, respectively) which are available on the Crestron
website (http://www.crestron.com/manuals).

Touchpanel Mounting

Tools Required: #2 Phillips tip screwdriver
1. If the cover plate is attached, use a #2 Phillips screwdriver to loosen and
remove the eight screws and plate.
2. Connect all required cables to the touchpanel.
3. Insert the touchpanel (without its bezel) into the mounting option and align
the eight screw holes.
4. Insert and tighten the eight supplied screws (finger tight and then using a #2
Phillips screwdriver, tighten an additional 1/8-turn).
5. Cover the mounted unit with the bezel. Refer to the illustration after this
step.
Wall Mount Touchpanels
POST-
CONSTRUCTION NUMBER
OPTION
-
-
-
-
Wall Mount Kit–Mud WMKM-12L
WMKM-15L
Lectern or Wall Mount WMKT-12L
Kit–Trim
WMKT-15L
Wall Mount Touchpanels: TPS-12G/15G-QM-L ¥ 33
MODEL DOCUMENT
NUMBER
BB-12L 6357
BB-15L 6362
PMK-12L 6358
PMK-15L 6363
MMK-12L 6359
MMK-15L 6364
TMK-12L 6360
TMK-15L 6365
6359
6364
6360
6365