Crestron TPS-12 Operation Manual page 28

Wall Mount Touchpanels
24 ¥ Wall Mount Touchpanels: TPS-12G/15G-QM-L
QM 1 Setup Details
QM 1 SETUP
SCREEN
CONTROLS
Auto Compensation Turns off auto compensation.
Disable
Auto Compensation Turns on auto compensation. When auto compensation is on, the
Enable QM receiving device uses the auto compensation data received
from the QM transmitter.
Video Puts the menu in Video mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for Video.
S-Video Puts the menu in S-Video mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for S-Video.
Component Puts the menu in Component mode so that you can adjust the
Peak, Boost, Skew Red, Skew Green and Skew Blue signals for
Component video.
RGB Puts the menu in RGB mode so that you can adjust the Peak,
Boost, Skew Red, Skew Green and Skew Blue signals for RGB
video.
QM 1 Preset Displays the current QM 1 Preset number. Saved presets can also
be called up using this control. Plus and minus buttons increment
the displayed value.
Load Preset Will load the selected QM 1 Preset.
Store Preset Will store any changes you've made to the QM 1 setup at the
displayed preset number.
Restore Default QM Restores the QM settings to their original defaults.
Settings
Peak Peak adjusts for high frequency attenuation that can occur over
long cable lengths.
Boost Boost compensates for overall signal loss that can occur over long
cable lengths.
Skew Red Adjusts the timing position of the red signal on the skew test pattern
to compensate for any losses caused by long cable runs.
Skew Green Adjusts the timing position of the green signal on the skew test
pattern to compensate for any losses caused by long cable runs.
Skew blue Adjusts the timing position of the blue signal on the skew test
pattern to compensate for any losses caused by long cable runs.
®
Crestron Isys TPS-12G/15G-QM-L
DESCRIPTION
Operations Guide – DOC. 6356