Wall Mount Touchpanels
48
¥ Wall Mount Touchpanels: TPS-12G/15G-QM-L
Toolbox – System Info
The Functions menu may now be used to upload a project, update firmware,
and reset the network ID.
Toolbox Functions Menu – Specific to TPS-12G/15G-L
NOTE: The list of functions depends on the type of device.
TCP/IP Communication
This section explains how to configure a TPS-12G/15G-L to communicate over
Ethernet using TCP/IP. These procedures assume that the touchpanel has been
powered up and connected properly.
PC-to-touchpanel communications can be implemented over TCP/IP as shown in the
following diagram. TCP/IP is the fastest method of communicating between the PC
and the touchpanel.
®
Crestron Isys
TPS-12G/15G-QM-L
Operations Guide – DOC. 6356