Mounting Options - Crestron Isys TPS-4L Operations & Installation Manual

3.6-Inch Wall Mount Touchpanel
8 • 3.6-inch Wall Mount Touchpanel: Isys
Network Device Tree
4. Click on the '+' next to the name of the device to display its current Net ID
setting, and then right-click on the Net ID you wish to change. When the
sub-menu appears, select Change Network ID.
Network Device Tree – Sub-Menu
5. The current Net ID is highlighted. Enter a new Net ID and press Enter.
Enter New Net ID
6. An alert message appears to notify you that the change was successful.
7. Repeat this procedure for each network device requiring a Net ID change.

Mounting Options

The TPS-4L touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. The TPS-4L is supplied with four screws and clips for post-construction
installation. All available mounting options are listed in the following table. (The
Wall Mount Kit – Bracket, Model WMKB-4L, consists of multiple sets of clips like
the ones supplied.)
®
TPS-4L
Crestron Isys
Operations & Installation Guide - DOC. 6449
®
TPS-4L