Crestron TPS-12 Operation Manual page 30

Wall Mount Touchpanels
26 ¥ Wall Mount Touchpanels: TPS-12G/15G-QM-L
Audio Setup Details
AUDIO MENU
CONTROLS
QM Link Status Indicates QM connectivity
Audio Input Select Selects the source of the QM Audio Input. This selection
QM Audio 1 determines whether QM 1 or QM 2 Mixer Inputs are displayed.
QM Audio 2
Restore Default Returns the audio setting to their factory defaults.
Audio Settings
Play Test WAV File Plays a short WAV audio file.
Master Volume The volume of all audio types (WAV, line, and key click) is
affected by the Master Volume control. If the Master Volume
control is set to 100%, the volume for any type of audio is at
maximum. If the Master Volume is set to 0%, the value of all
audio types is overridden and the touchpanel is silent. If Master
Volume is a percentage (say 50%), then all audio types can only
achieve half their value.
Bass Adjusts the overall bass output with the plus and minus buttons.
Treble Adjusts the overall treble output with the plus and minus buttons.
Mute A separate mute button is provided for each of the five mixer
inputs and one for the Master Output.
QM (Prog) Adjusts the QM 1 or 2 program audio level, depending on Input
Select, with the plus and minus buttons.
QM Mic 1 Adjusts the QM 1 or 2 Microphone 1 input level, depending on
Input Select, with the plus and minus buttons.
QM Mic 2 Adjusts the QM 1 or 2 Microphone 2 input level, depending on
Input Select, with the plus and minus buttons.
Key Click Adjusts the level of the key click sound with the plus and minus
buttons.
Wave Adjusts the volume of the Wav file with the plus and minus
buttons. Click Play Test WAV File button to sample and adjust
the volume as a pre-loaded WAV file plays.
®
Crestron Isys TPS-12G/15G-QM-L
DESCRIPTION
Operations Guide – DOC. 6356