Touchpanel Mounting Options For Tps-4500Lv - Crestron Isys TPS-4500LV Operation Manual

12 inch tilt and lectern touchpanels with video
Hide thumbs Also See for Isys TPS-4500LV:
Table of Contents

Advertisement

Crestron TPS-4500V & TPS-4500LV
Operations Guide - DOC. 6160
Video Connections
SOURCE SELECTION
TPS-4500V
TPS-4500IMPC
NOTE:
To display video, Cresnet power
or 24VDC MUST be connected
to the TPS-4500IMPC.
NOTE: The source selection switches must be set to "BAL" if CAT5 wiring is used
or "COAX" if the BNC connectors are used.
NOTE: For additional information on video connections over CAT5, refer to the
latest version of the Crestron CAT5 Wiring Reference Guide (Doc. 6137) which is
available from the Downloads | Product Manuals section of the Crestron website
(www.crestron.com).
After connecting the video cables to the proper connector, the appropriate source
selection switches must be set and the video input must be set in the Video Menu.
Refer to the latest revision of the TPS-4500IMPC Interface Module Operations
Guide (Doc. 6163, included with the TPS-4500V touchpanel) and "Video Menu" on
page 13 for more information.

Touchpanel Mounting Options for TPS-4500LV

Back Box Mounting
Back box mounting is typically used at new construction sites. The optional back
box, BB-5000, includes the necessary hardware, brackets and electrical box, which
provides a secure enclosure that can be fastened directly to a stud. The details for this
optional mounting method are provided in the latest revision of the BB-5000
Installation Guide (Doc. 5827). After completing the steps in the installation guide,
simply mate the four posts of the bezel with the holes drilled into the mounting
surface and firmly press the bezel over the touchpanel.
NOTE: The mounting hardware and accessories supplied with the TPS-4500LV are
not required for the back box mounting option.
12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV • 19
12 Inch Tilt/Lectern Touchpanels
RS-232
NET/VIDEO
SWITCHES
2 1
COAX
BAL
CRESTRON
TPS-4500IMPC
24VDC
NET
2.0A
24
Y
Z
G
CONNECTED
CONNECT TO
TO CRESNET
VIDEO SOURCE
24VDC 2.0A
10-PIN
NET/VIDEO CABLE
VIDEO
NET/
PANEL
TO
NTSC/PAL VIDEO
COMP2
COMP1
COMP1
COMP2
C
Y
Y
C
+
- S
+ -
S

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isys tps-4500v

Table of Contents