Crestron TPS-12 Operation Manual page 56

Wall Mount Touchpanels
52 ¥ Wall Mount Touchpanels: TPS-12G/15G-QM-L
"IP Table Entry" Window
NOTE: All IP table entries are set as Master and cannot be changed.
6. In the IP Address/Hostname field, enter the static IP address of the control
system, or if the control system is DHCP-enabled, its fully qualified domain
name. After entering all of the information, click OK to add the device to
the IP table.
7. Repeat this procedure for all the control systems that will control the
touchpanel.
8. Click Save To File... on the "IP Table" window to save this IP table to the
PC.
"Save As" Window
9. Once all of the control systems have been listed, click Send to Device on
the "IP Table" window to upload the IP table to the touchpanel. The
touchpanel will reboot and all of the table entries will be listed in black.
NOTE: When an IP table is sent to the touchpanel, the previously loaded IP table is
overwritten.
®
Crestron Isys TPS-12G/15G-QM-L
Operations Guide – DOC. 6356