Crestron TPS-12 Operation Manual page 55

®
Crestron Isys TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
"IP Table" Window
2. If the touchpanel already has an IP table, it is displayed at the top of the
window.
3. Click Add Entry to add a new IP table entry or select an existing IP entry
from the list and click Modify Entry. Up to 252 entries can be listed on a
touchpanels IP table. Click Remove [Del] to remove a selected IP entry or
click Clear List to remove all of the entries from the IP table.
NOTE: IP table entries that have not yet been sent to the device are listed in
red.
4. Click Load From File... to browse for a saved IP table.
"Open" Window
5. To enter a new IP ID, select the hexadecimal IP ID of the control system
from the IP ID list. The IP ID of the control system must match the IP ID
that is specified for the control system in the SIMPL Windows program.
Wall Mount Touchpanels
Wall Mount Touchpanels: TPS-12G/15G-QM-L ¥ 51