Mounting Options; Touchpanel Mounting - Crestron CT-1000 Operation Manual

Crestron CT-1000 & LC-1000
Operations Guide – DOC. 5813B
Hardware Connection for the Series 1000 (Back of the Unit is Shown)
ELECTRONICS, INC.
ROCKLEIGH, NJ 07647
U.S.A.
CT-1000
ZAxxxxx

Mounting Options

The Series 1000 touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. All mounting options are provided separately from the actual touchpanel.
Refer to the table after this paragraph for a complete list of mounting options and
respective Installation Guides for the Series 1000 touchpanels.
Mounting Options for the Series 1000 Touchpanels
PRE-CONSTRUCTION
OPTION
Back Box Kit
Pre-Construction Mount Kit
Mud Mount Kit (accessory)
Trim Mount Kit (accessory)
-
-
-
* Pre-construction refers to framed walls prior to hanging drywall.
** Post-construction refers to framed walls with drywall hung.
*** Cover can be placed over installed touchpanel.
NOTE: Early production units ship with two mounting brackets (and other parts)
that allowed the low-voltage touchpanel to be installed directly into a mounting
surface. If these parts are supplied with the touchpanel and a direct mounting option
is preferred, refer to "Appendix: Early Production Units" on page 34.
If the BB-1000L or PMK-1000L are to be used and a touchpanel is not available, the
installer can either leave the hole in the mounting surface open (if permitted by local
building codes) or attach the cover plate supplied with these two mounting options.

Touchpanel Mounting

Required Tools
#1 Phillips tip screwdriver
C000000
*
POST-CONSTRUCTION
OPTION
-
-
-
-
Wall Mount Kit - Mud
Wall Mount Kit - Trim
Water Resistant Cover
Series 1000 Wall-Mounted Touchpanels • 11
Touchpanels
CONNECTS
TO
CONTROL
SYSTEM
**
MODEL DOCUMENT
NUMBER NUMBER
BB-1000L 6060
PMK-1000L 6061
MMK-1000L 6062
TMK-1000L 6063
WMKM-1000L 6062
WMKT-1000L 6063
*** CT/LC-WPK 5932