Mounting Options; Touchpanel Mounting - Crestron Isys TPS-12L Operation Manual

Wall Mount Touchpanels
28 ¥ Wall Mount Touchpanels: TPS-12L/15L/17L

Mounting Options

The TPS-12L/15L/17L touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. All mounting options are provided separately from the actual touchpanel.
Refer to the table after this paragraph for a complete list of mounting options.
Mounting Options for the TPS-12L/15L/17L
PRE-
CONSTRUCTION
OPTION
Back Box Kit
Pre-Construction
Mount Kit
Mud Mount Kit
(Accessory)
Trim Mount Kit
(Accessory)
-
-
NOTE: Pre-construction refers to framed walls prior to hanging drywall.
Post-construction refers to framed walls with drywall hung.

Touchpanel Mounting

Tools Required: #2 Phillips tip screwdriver
1. If the cover plate is attached, use a #2 Phillips screwdriver to loosen and
remove the four screws and plate.
2. Connect all required cables to the touchpanel.
3. Insert the touchpanel (without its bezel) into the mounting option and align
the eight screw holes.
4. Insert and tighten the eight supplied screws (finger tight and then using a #2
Phillips screwdriver, tighten an additional 1/8-turn).
5. Cover the mounted unit with the bezel. Refer to the illustration after this
step.
Crestron Isys
POST-
CONSTRUCTION NUMBER
OPTION
-
-
- MMK-12L
MMK-15L
MMK-17L
-
Wall Mount Kit - Mud WMKM-12L
WMKM-15L
Wall Mount Kit - Trim WMKT-12L
WMKT-15L
WMKT-17L
®
TPS-12L/15L/17L
MODEL DOCUMENT
NUMBER
BB-12L 6357
BB-15L 6362
BB-17L 6367
PMK-12L 6358
PMK-15L 6363
PMK-17L 6368
6359
6364
6369
TMK-12L 6360
TMK-15L 6365
TMK-17L 6370
6359
6364
6360
6365
6370
Operations Guide – DOC. 6355