®
Crestron Isys
TPS-12G/15G-QM-L
Operations Guide – DOC. 6356
Video Menu
These touchpanels can display two fully-scalable and movable, full motion video
windows, each supporting standard video, HDTV and high-resolution RGB signals
from external AV and computer sources. These units use auto-detect for composite,
S-video or component RGBHV. They support SDTV (NTSC and PAL), EDTV,
HDTV and RGB (VGA) up to UXGA (1600 x 1200). Two video inputs provide for
connectivity to QuickMedia. You can perform Auto Detect by selecting QM Audio
1 or QM Audio 2 or manually choose Video, S-Video, Component or RGB as an
input source. Black and white can also be enabled for either video channel.
A table describing the video menu controls follows the illustrations.
Touching on the Video button on the SETUP MENU, will open the screen shown
below. From here, you can enter the setup screens for both Video 1 and Video 2 by
touching their respective buttons.
VIDEO SETUP
Refer to the following table for additional VIDEO SETUP MENU details.
Video Setup Details
VIDEO SETUP
SCREEN
CONTROLS
QM Audio 1
Detects the presence of QM Audio on channel 1 when selected.
QM Audio 2
Detects the presence of QM Audio on channel 2 when selected.
Continued on the following page
Wall Mount Touchpanels
DESCRIPTION
Wall Mount Touchpanels: TPS-12G/15G-QM-L ¥ 27